RollPod is a fully user configurable control panel ideally suited to IQ Modular control and configuration in operational environments and interfacing to RollCall enabled equipment. RollPod features include:
- User customisation both locally and through downloaded configuration files
- Up to 16 assignable push buttons
- Up to 4 shaft encoders
- 8 Soft buttons
- Message and parameter display
- Single control per RollCall function
- In button multi-color LED tally
- User definable ‘In-button’ labels
- RollCall connection via coaxial cable
- Configurable panel to enable control of any function of any unit connected to the RollCall network
- Compact size enables three panels to be installed in a 19 inch x 3U rack, or single panels to be easily desk mounted
Configurable Control Panel.
RollPod Configurable Control Panel,
4 shaft encoders and 12 buttons.
RollPod Custom Configurable
Control Panel, 4 shaft encoders and
RollPod Confi gurable Control
Panel, 2 shaft encoders and
RollPod Custom Confi gurable
Control Panel, 2 shaft encoders
and 16 buttons.
RollPod/RPAN PSU, upgrade RollPod
to dual redundant PSUs, or for use
as a cold spare.
RollPod 3U Mounting Rack. Mounts
up to 3 RollPods. Blanking plates
included to screen the rack when
one or two pods are fitted.
RollNet coaxial Via BNC connector
Soft keys 8
Hard keys 12 (RollPod 12), 16 (RollPod 16)
Shaft encoders 4 (RollPod 12), 2 (RollPod 16)
Hard keys Multi colored
Soft keys Button with LED indicator
Display LCD Bitmap display
Controls via RollCall Remote Control System
Full configuration, e.g button assignment, target device setup.
LCD display brightness
LCD display contrast
Hard button LED brightness
Soft key LED brightness
Power Via mains operated external adapter
Input 100-240V AC @ 47 to 63 Hz 1A max. Output + 9V DC at 1.67 A
Power consumption 7.2 W
Temperature range 0° to 40° C operating
Case type Special metal case
Overall dimensions 140 mm x 130 mm x 70 mm (w,h,d)
Hole cutout dimensions 132 mm x 112 mm x 86 mm (w,h,d)
Weight 0.94 kg
As with all Snell products, our RollCall control panels have been designed and engineered to the highest standards.
To configure your RollPod, you will need either RollPod Configurator or RollPod Designer.
For 3U RollPods, fitted with 1A CPU boards, use RollPod Configurator.
For 1U RollPods, 3U RollPods fitted with 2Y CPU boards or Snell GPI Modules (IQGPI00-1 and IQCGPI-B-R), use RollPod Designer.
Both these applications are available on our software updates page for control and monitoring.
Find out who your local sales contact is here.
Alternatively, complete the online form below and a Snell colleague will contact you shortly.